FOLLOW US

NEW! Wood to Metal Post 624 Kit

Straight  and stair cable runs  through one corner are ideal applications for the 624 Series Kit. There needs to be dedicated end posts for each run, and posts  situated such that the back side of the posts are all accessible, meaning you can use a through-the-post configuration.

For metal posts, a minimum of 1-1/2″ outside diameter is required. Wood posts are recommended to be a minimum of 4″ x 4″. 

Included in the kit is a tensioning Invisiware® Receiver fitting. The receiver installs through the post on one end. A Push-Lock® fitting is installed into the other end post.

When taking cable railing through a corner, do not bend the cable past 45 at any one time. If turning 90, a 2-step turn using a double corner post configuration is required.

 

Required Installation Tools
 
  • 5/32″ Drill Bit
  • RFXPL-KEY
  • 7/32″ Drill Bit
  • Cable Gripper
  • 29/64″ Drill Bit
  • Cut Off Kit (mandrel)
  • 3/16″ Allen Wrench
  • Cut Off Kit (wheel)

Order our Installation Kit along with your Cable Kit to ensure you have the required tools needed. Use the Part Number INSTL-KIT-100_200

Find What You're Looking For?

If you’ve found what you’re looking for, then it’s time to find a dealer to make your purchase.