Metal Post 212 Kit
Straight cable runs and cable runs through one corner are ideal applications for the 212 Series Kit. There needs to be dedicated end posts for each run, and posts situated such that the back side of the posts are all accessible, meaning you can use a through-the-post configuration.
For metal posts, a minimum of 1-1/2″ outside diameter is required. Included in the kit is a tensioning Invisiware® Receiver fitting. The receiver installs through the post on one end. A Pull-Lock® fitting is installed through the other end.
When taking cable railing through a corner, do not bend the cable past 45⁰ at any one time. If turning 90⁰, a 2-step turn using a double corner post configuration is required.
